CharleyH .

I just added the new 2019 Radical Rapture to the "Resource Library". Stop by and take a look. Charley Attachment : Rapture cover.JPG

That looks like a great lift! Who makes it? you really wont need to get the car it the air that high. The lifts at Spring mountain only lift the car ~3'. Charley

Posted by: @graemed There must be some more photos of the collateral damage! I'm sure there was more damage, but these are the only pictures they sent me. Charley

Welcome to the Forum David! Unfortunately I don't have that information for the RXC battery. I would recommend giving Spring Mountain or your local dealer a call. Hopefully one of the other members...

I just added the SR8 RX (Gen 2) Owners Manual added to the Resource Library. This one has been very difficult to find. I also added the Wiring diagram for Chassis Harness. Charley

Yes, they are each separately mounted rigidly to the chassis. Charley

A friend of mine in the UK sent me these pictures and they are a good reminder to inspect your uprights. The recommended inspection interval varies depending on which model you have, but you can find...

Thanks for checking in Fred. For those that don’t know Fred, he is the owner of Reverse Logic, and he developed the TR-114 Race Ramps. He knows more about Race Ramps than anyone else I know. Charley

@johnannz You could contact Fred at Reverse Logic and see if they can make one with the Flap cut out. When I got mine I knew that the Radical was the only car that would go into my trailer so I figur...

Another thing I should point out is that Radical made a change to the engine mounting system a few years ago which is highly recommended to use. In this picture you can see a black machined part that...

Posted by: @archfarseer Posted by: @charleyhradicalsportscarregistry-com Great idea Neal about creating a Safety gear section. I will create it and move this post over there. Here are my 2 cents ...

Posted by: @archfarseer Thank you for the warm welcome, guys! I will add my sr3 to the registry. I think my helmet should be better with the sparco top spoiler and chin spoiler added. Look forward to...

Great idea Neal about creating a Safety gear section. I will create it and move this post over there. Here are my 2 cents on the helmet (taken from another post). I use a Bell GTX.3 Carbon and really...

Here is a shot of it in the car. Attachment : IMG_2277.JPG Here is a top view. After a bit of rain it had some surface rust that was later removed. Attachment : IMG_2426.JPG Here are...

I took my car over to CoverKing and had them make a custom cover for me. The kept the template so they could make others. It isn’t on their website but if you call them they should be able to help. I ...