CharleyH .

Thanks for the update John. Looks great!

Great find!

I'm glad to hear that you got it out on the track! Sorry to hear about your challenges. I agree with Graeme and John that the first thing to check is to look at the data to make sure the car is cha...

I never did a leak down test on my car so I don’t have any data. But that is great news about your new engine! Because of the previous owners death it has been difficult to find the full story on th...

Posted by: John Parsons I bought a Stilo helmet and found that it had much less lift, even without any aero aids. I don't want to be the nag, but you guys are using HANS devices, I hope? 🙂 Yes, I ...

I upgraded to the Halo and really liked it. My head would touch the headrest, it wasn't planted against it for long periods of time. I found that adding a spoiler to my helmet helped reduce buffeting...

Well Honda and Subaru engines have been installed into these chassis but apparently it didn't make them better cars. The SR5 had a Honda engine but only about 24 were ever built. It seems like it wo...

It is great to hear that the car is working out well. I think you got an amazing deal on that car. It's hard to tell in the pictures, does the second nose have headlights? Also, you mentioned that ...

Yes, it looks like your stack system is tied into your CAN-bus to me. For reference this is what the sticker on my SR3 ECU looked like. Attachment : IMG_3420.JPG

Posted by: johnsopa Posted by: CharleyH John, since your car is just getting back on track after hibernating for a while I would recommend checking the condition of the grease on the half shafts. It...

Congratulations on the new car! Stack still sells these so you can get the manuals and diagrams directly from them. Regarding removing the dash, I believe they are installed the same way the Aim das...

There should only be traces on the magnet. This is what the magnet on mine looked like when I changed fluids right before I had the engine overhauled after 40 hours. I suspect that the previous owne...

I have never hear of or done this. I just fill it until it starts to flow out of the fluid level hole. One time I tried over filling it a little thinking it would help to have some extra oil... This...

Posted by: GraemeD That looks like it’s from the movie “Ghost Busters”! I would remove them, disassemble, inspect and replace all the rubber parts. As you know, brakes are one area that you want to h...

Today I scooped the gel out of the master cylinder. The blob was quite large, but the good news is that gel doesn’t appear to be it the brake lines. Now I am waiting on the parts to rebuild the calip...