Crit Scholer

Absolutely loved autocrossing my SR3, had a hard time getting the Michelin's up to temp. Here's a vid of my fastest run. I edited out stalling it on the start line 🙂

I'm looking at the carbureted version, I actually called radical and they sent me the carb wiring diagram which Charley just added to the library. All the wires going to the coil pack are white. I was...

Carbureted SR3 with MBE ignition, I'm looking at the wiring diagram and trying to figure out where to wire in an aftermarket tachometer. It shows there is a connector for a RPM pickup/Data logger. Not...

Thanks Charley, I’ll raise the idle. I’m going to install a better tach as I have a gen 1 radical dash and a racepak g2x that has an erratic tach but is pretty consistent with startup idle somewhere b...

Hi guys, so I auto crossed the car yesterday for the first time and it was pretty damn impressive. I was however concerned as I made the last turn through the timing lights I was maybe going about 10...

Posted by: @parsonsj I use a Ridgid 18v impact gun. Hit it hard for about 3s. I've checked the torque a few times with the aid of a strong-legged helper and 3/4" torque wrench, and it's always been f...

Is the only way to torque the center locks having two people with one person stomping on the brake pedal while the other one torques the centerlocks? I can't really think of another way. Sometimes I'm...

The Centerlock nut on the SR3 is also 70mm so that should work! Thanks!

I unfortunately missed the one that Charley mentioned on eBay. Does anybody happen to have an extra center lock socket tool they're willing to part with?

@trakmnky Do you have that padding zip-tied as well or just use the adhesive it came with? Have an installed pic?

Radical UK sent me the wiring diagram for the carbureted SR3. Here it is, Charley feel free to upload it to the technical section. Attachment : sr3 mbe ignition and carbs..pdf

Will do!

Charley, it would be awesome to meet you. Please let me know next time your headed north!

I tested the Healtech Gear position indicator yesterday, unfortunately it was not plug and play with the radical but I was able to get it to work. The wiring on the radical side of the harness shorts ...

Hi Charley, Spring Mountain said the Michelins that are on the car should come up to temp quickly if it is warm out. I was thinking about letting it idle or holding it under 3k to warm up as much as p...