Garrett Taylor

I run the Sunoco GT 260 here in the US in mine. That or VP 100 seems to be the fuel of choice.

Not a pro here. But I ran my first set of Hankook slicks for an entire year. Probably 80 heat cycles. They weren't cycled out and I got to the cords on the right front otherwise I would have kept runn...

This is finally resolved. I thought I'd post what I learned in case any other mechanically inept soul gets stuck doing this. 1. Get two new seals instead of one. Inevitably the first will fold over. I...

@kitleslie Is your brake sensor working correctly in the video overlay? I noticed several spots where you have both brake and throttle inputs.

I've had the seal in twice now. Both times fuel still leaked. On the way back out, the seal seemed like it was in good position. There wasn't any signs of folding or damage to the seal. The snap rin...

I wondered that too. Putting it in the other way doesn't seem to have any chance of working. There is a second lip inside the hole the seal sits on. If it was upside down it would just crush up agains...

Attachment : 2020-08-20 12.03.28.jpg Attachment : 2020-08-20 12.01.25.jpg Attachment : 2020-08-20 12.03.25.jpg Attachment : 2020-08-20 12.01.30.jpg Attachment : 2020-08-20...

Well I got the new seal and gave installing it a go tonight. I immediately managed to fold it over. Any tips on a mechanical shortcut to keep the seal in it's proper form while seating the pump? I'm n...

@crit Spring Mountain

I've got a seal coming in the mail. According to Spring Mountain there is only one size of seal they are just difficult to get in without folding or bending. I will update with the process on how it g...

Too large in diameter. The seal is "new"in the sense that it was put in the car over the winter along with the aluminum fuel tank. Attachment : 20200807_205953.jpg

Those look like a match. Do you know if there are two different sizes of that seal? The one on my pump appears to be a bit too large.

Does anyone know who manufactures/supplies the fuel pump seal () for the 20 gallon aluminum tank setup? Mine is folded over and need another.

I had a bit of an off track adventure at my last event and need to some glass work on the side skirts. Is there anything special or unexpected about removing those? Plan was to drill the rivets and th...

@rjbender - what you are seeing in the Smarty cam footage is just that the video overlay is set to max out at 10k RPM. If you could see the shift lights or read the revs on the dash they are still con...