Mike Smith

@dunc Are you saying that's how your Clubsport is set up? Seems simple enough. I guess if the POs weren't too bothered about drilling holes in the floor tubes, why should I be? 🤣

@dunc - that's what I understood you to mean. My Prosport is the opposite; back for 1st, forward to go up a gear - same as Charley's observation. On the bike, the gear lever pivots behind the rider's ...

Not ferrous. Super fine, about the same weight as the soot also in the oil. Looks like just a little in the bottom of the oil filter housing, didn't turn any up in the oil tank, so going to cross my f...

Posted by: @dunc Both my clubsport (was) and PR6 (is) like that - pull back for higher gears. It can be reversed but it makes much more sense to pull when acceleration is pushing you backwards then...

And fixed. Bend the tabs, apply Harley battery strap. Next, what's this pixie dust in my oil? 8(

@charleyhradicalsportscarregistry-com Thanks for the pics; I was considering that, but hoping I could get the battery tray out to do something a bit more elegant on the bench. Sadly, no such luck, it'...

Answering my own question, sort-of, because what else am I going to do? Attachment : image.png Courtesy @CharleyH a picture of the SR3 battery box. It looks like a regular rectangular battery s...

Can anyone help with a picture of the original Prosport (maybe clubsport) battery tie-down? I'm guessing it was a rubber strap of some sort, but I'm not turning up anything super helpful. The PO did s...

Posted by: @tommymills Tage...super newb here in terms of SR3 knowledge. What is the advantage/disadvantage of the 3 piece wheels? The current spec wheel is the one piece. With a 3pc wheel you can ...

@rjbender I have ~1" of splitter clearance at the front (see pics above), absolutely NWIH it'll go up forwards. It scrapes a bit going backwards, but I could probably jack the trailer a bit more and a...

@rjbender Did you try loading backwards?

A very, very ordinary 24" enclosed car trailer, plus a set of RB Components ramps (don't see them on their website anymore, but someone has to be making something similar). Front of the trailer is lif...

While calibrating the gear position indicator, I realised that the shifter configuration (back to select first, forward to select higher-numbered gears) is 'backwards' compared to what I'd expect (and...

@clubsport055 Apologies for the delay - I do indeed have the frame & the wing mount extricated. Attachment : IMG_3032.jpg The wing mount's not much use to me without the frame, so if you ne...

@crit If it had a gear position sensor I'd have built my own display with a suitably enormous digit, but sadly no, this is an old-school Kawasaki setup and I didn't want to spend the time fiddling wit...