Gordon Campbell

Had the same issue tried everything got my local mobile truck guy put his big double handed air gun with 1100 lbs on it still wouldnt move reset gun to 1500 and spun off as normal rel...

Also dont use a socket to tighten up as can catch plastic piece and break internal wires ?? so only use open end spanner think totques about 8lbs ft ps u can suck/pump out oil in tank and...

yes its been perfect ..purchased from RADICAL IN UK

I use this bought from ebay fluorescent colours

RADICAL PART NO.TP0028 /6MM TPOO63/4MM i had same problem tried few companies on ebay problem was heat failure ..never had problem with original Radical black hose and ...

JUST cant c it ??? enlarge please

Radical sell spacer tool but they said use a cable tie !! much cheaper 🤣 🤣

Attachment : 20220523_153432.jpg

I used a pair of large pipegrips on outer shaft but had to machine 36mm 12sided socket to fit centre nut clearance .. also used 2 grub screws (allen key ) that locks against the flats of nut ...

Thanks for reply .. had car for 5 years never had a problem charging untill the original rectifier packed up (dropping voltage ) had a spare one (ebay one ... that few of my mates hav...

IN LINE fuse holder melted as cant pull out fuse and white connector melted .. easy repair as can buy end 6pin connector and in line fuse holder but would like to keep as spare ...

HI anyone got wiring details for charging loom ( one with 3o amp fuse /relay ) as fryed rectifier connector ..

u can get access from small side panel held in by allen key bolts and use allen key to slacken drain plug on base of compressor unit .. some cars also have a hole drilled on underside wit...

Glad u got that sorted

I would consider SIMPSON HANS DEVICE fits all