Dan Millsaps

For anyone needing tires, I just discovered a nice 10% off discount code via HankookMotorsports.com for our tires. It works today, have no idea how long: HISTORICWORLDCHALLENGE

FYI - a couple updates on some tools. Found a great source for the special clutch 8mm bleed tool, much cheaper than Snap-On. As for the very difficult 3/4" nut on back side of rotor drive pegs on ...

No affiliation, but have heard really good things about these.

Can you share/send exact build sheet for this car, not general info from Radical website. I have a friend looking for one, but would not want to recommend one without seeing the real build summary an...

I suspected all the above, thanks for clarifications. Yes, I am used to seeing on Porsches and other cars. With that being said, these are certainly somewhat fragile areas of my SR3XX fenders as two...

Ok, dumb question for all the experts, but what purpose does the body louvers serve on front fenders? I am unclear how it affects air flow, aero, cooling, or whatever. Attachment : image.png

I would like to know more, please send details to 617dmm@gmail.com. The only way that I can justify that long road trip from TX would be to parlay with other weekend event, so please share the other ...

Another good question, long term storage. This can certainly cause some debates: empty or full fuel, etc. I also store mine for ~2 months until Feb track weekend. My longest storage is actually in...

I have tried to figure that our myself on my 2021 SR3 XX, just to have spare parts available in my shop and especially at track just in case. I keep two extra brake discs and extra brake pads I purch...

My car is 2021 SR3 XX. I just noticed the passenger side header from underside of car is actually resting on this engine casing bolt (not sure what that covers). Regardless, does not look right as a...

Awesome, thanks for the legwork David, I just order some myself.

I ordered some 1/8" HPDE boards, will cut to size, and try this added layer for sacrificial surface. Certainly significantly less expensive than the factory dense wood shapes assuming it works well.

As noted above, they are peel rivets - easily drilled out with 5/32" bit. Exact rivet from McMaster shown below. Like a dumb butt, figured out the two screws in center pad. Attachment : image.pn...

Thanks, understand now, had never used exploding rivets before, ordering some now.

See photos on my 2021 SR3 XX. What should be a simple exchange of wear pads has turned into a royal PIA. Attachment : IMG_5646.jpg Attachment : IMG_5647.jpg The center front diffuser pa...