Rod Bender

@charleyhradicalsportscarregistry-com Yeah its a fair question but yeah been working on the front left, red nut, anti-clockwise thread (just making sure) and folowing the “undo” arrow on the nut

@parsonsj I’ve got a new 18v milwaukee 1898nm impact but that couldn’t getting it moving either, really don’t fancy cutting the nuts off so willing to try anything else first ha!

@nickallitt What sort of impact gun are you using to remove them? I've never had one that my Snap-on 5100 won't get off. If you haven't invested in one, the 18v Milwaukee cordless guns are awesome too...

I would try putting a good penetrating oil on the threads. Kroil is the best prnrtrating oil that I have found.

Hi @allblackeverything? One of those ports charges the battery in the left side pod and the other charges the battery in the engine bay. You can either charge them individually or you can get a secon...

Hi everyone, thanks for such warm welcome and reassurance that a Radical isn't going to chew me up and spit me out. But it seems like I did not need much convincing at all because after reading the f...

Kevin, I've been promising this for a while so I went out and took some measurements last night. I've attached those for now so everyone at least has a starting point. I'll repost a better drawing ...

Great idea!

Hi @rjbender, yes you are correct that the color reflects the hardness of the bushing. I would recommend using the latest bushing, which I believe is black. The bushings that you have will work but ...

Attachment : IMG_6240.jpeg Attachment : IMG_6241.jpeg Attachment : IMG_6242.png Attachment : IMG_6243.png Attachment : IMG_6244.png Hi Rod, I run a PR6 so this might ...

Below is a picture of the fuel cell foam being prepared for the fuel cell. This was from my 2021 SR3 XX which required a baffle upgrade to keep the fuel from rising upward, which is not really worth ...

Sorry to hear about your “off track excursion”, I hope you are alright. Unfortunately I can’t be helpful with your question.

Hi @danamg, welcome to the Registry! I see from your recent posts that you are trying to decide between the RXC Spyder and and SR10 and are wondering why all of the dealers are pushing you toward the...

I found a thread here in the forum where there is a picture showing how large the distance must be from the paddle shift actuator assembly. According to the original measuring template for the SR3 166...

Hi Helmut @helmutweber, The advice that’s the previous owner is not correct. Follow the instructions in the manual. The black button on the steering wheel is used to shift into neutral. When you w...