Rod Bender

Thank you Rob. Yes I have bleed brake fluid before but all have just one 1 resviror. And I think the radical has 2 bleeding valve/ caliper which I think thebcars that I bleed before only has one.

@rjbender I see 3 resvirors in the front. 1 isn't he clutch fluid, the other 2 is front and rear brakes fluid? So 1 for the front and 1 for the rear and they are separate? I was planning to change bra...

I'm going through the lists off the manuals etc... but with a possible first outing at Silverstone next month (i'll see what the forecast is like!), the car will have been parked for 4 months. I've on...

I just bought SR3 0925 from Robert Burgess for track days which I now enjoy more than vintage racing. With 50 years of British race car history between the 2 cars in my garage, I think the SR3 will ge...

Now that my old Prosport is updated with quality dampers, brakes, larger wheels, fuel injection and RPE dry sump in a 1340, I'm preparing a 1500 for the upcoming season. Charley has told me that when...

Hi, Has anyone changed the Life ECU Battery them selves ? 2012 SR8 Thanks

RADICAL PART NO.TP0028 /6MM TPOO63/4MM i had same problem tried few companies on ebay problem was heat failure ..never had problem with original Radical black hose and ...

Thank you for the part numbers Gordon. If the Bowden tube I ordered doesn't do the trick ill pick up the Radical line.

Hi Josh -- I'm a tinkerer too, and I agree on it being half the fun. I wanted to install a clutch actuator this past fall (my track "season" is from December to May), but I couldn't get the vendor to ...

@schneller I have, using an MXS 1.2 AiM dash. I got the camera from Pegasus Racing (less than $150) and connected it to the "rear video" port on the AiM dash. I activate it with a button on my steerin...

Excellent info Rod! You Sir answered exactly what I needed. I had seen that exact tube in my late night searching and thought it looked promising but to have you confirm it is perfect. Placing an orde...

Those new sidepods look awesome. I debated with myself for a while if I should build a sharkfin into my sr3 re-body when molding the new carbon parts, i ended up no doing- it but after seeing it on th...

I don't know the answer with certainty, but I would look at polyurethane pneumatic tubing. It looks similar and it has properties which I think would work well -- high pressure, flexible but resists ...

I have had issues melting the 4mm OD and 6mm OD shift lines from my compressor tank to the shift solenoids and the throttle blipper. Ive changed routing, material and even sleeved the line using diffe...

@rjbender Thanks Rod. Very helpful! I have a 2015 RSX that I just use for track days at the moment, mostly Winton. SR3 XX looks great! If you do decide to sell the second engine rather than keep it as...