m roj

i'm about to do this myself.... just how quick do we have to be when fuel has stopped draining into the container, to turn off the pump before doing any damage to the fuel pump? because when i attemp...

@higgins613 hiya....finally got round to screwing this on. Bit of a bummer that 32306 doesnt come with a cap to cover the end! i'm a bit weary about leaving a dry break fitting exposed. did yours n...

@davidf @CharleyH please could you advise on a brief step by step to remove the discs? it looks like i need to remove the 2 bolts holding the caliper to the hub. EDIT: can ignore the below sentence...

i need to induce some understeer into my car before my next outing (track day next week). here's my current setup: Attachment : image.png after i first drove it last month, the turn-in is pre...

sorry folks i was being blind...didn't notice the '8ft/lb' in the manual with the arrow pointing to the hole.. whoops. @charleyH when you say "replace the hardware" are you just on about the bolts, i...

i've never swapped out 2-piece rotors before... i was going to rotate the fronts to the rear, as the rears have more surface cracks. Then i was going to swap the front discs for some spare new ones i...

here's my first ever drive in my car at Donington UK. 6 months in the making! unfortunately this was the only (and i literally mean that) clear lap out of 78..... driving these cars on a general track...

sorted 👍 wish i could put a nice tillet formula seat in here instead of the radical bathtub but looks like i'd have to fabricate bespoke mounting points somehow... bit of a project i guess. ...

i have a schroth enduro 2x2 6 point harness. Can anyone confirm if this is a fairly standard way the crotch straps are mounted in your cars? Because for me .. 1. there simply isn't enough gonad spac...

@rjbender thanks for the detailed response - yup it is definitely reversible. I was borrowing someone elses wrench (the only other radical owner on the day) - i got to track and realised i'd left th...

@charleyhradicalsportscarregistry-com it is reversable yup. i just gave it a go with my torque wrench and it was fine, though i had to use my ratchet clamp spreader thing to hold the brake almost al...

@davidf i dont understand why i found it an impossible task then. as i say, the main reason i couldn't use the torque wrench was because the wheel itself was rotating - even with my mate pushing down...

How on earth are you guys torquing up your wheels? Let me explain... when we got to the track, i set my torque wrench to 360NM (as per the manual), placed some wheel chocks, and got to it. Only to fin...

not sure if this is directly relevant to the thread but I've spent a while looking at the wiring on my car, which is all XX - - the radical wiring loom does allow you to utilise all the PDM's expansi...

to wrap up this thread..........the answer is that you need a cable from radical which allows you to connect the wheel directly to RS3 via USB. part number LH0377. It's a female deutsch connector on...