Trailbrake

The rumors of my demise have great been exagerated! 🤣 It sounds like the input board might be damaged. The PDM would have to go back to AiM to get checked out. If you're in the US, it can ...

The gasket will have to come from AiM. You're best best bet is probably to send the camera into AiM and let them check it out. They can hopefully get the lenses back in correctly and replace the gaske...

It sounds like you have it further apart than a user would normally take it apart. If you took out the main lens, it will need to be focused as well. The other issue is why there was moisture in there...

The Dual needs a separate power input in addition to the 5 pin 712 connection. The cable that connects to the SC3 Sport will plug into the Dual. Power requirement is a few amps, so nothing major, but ...

I'm just seeing this thread. The Radical and AiM integration are a difficult issue. To start defining things, it's important to know the players - AiM Sportline makes the hardware and is in Milan, Ita...

The MXL2 has been discontinued, so there are no deals on them 🙁 I do have all the other AiM dashes in stock and am happy to help out. I usually do Black Friday deals on TPMS systems, but I'm open to s...

As far as I know, the FSW is the same, but I'm not an expert on the Radical install. If you call and ask the guys at AiM, they will be able to make sure the SW4 is the same as the one in the SR10. If...

Posted by: @jclee matt@trailbrake Matt, it sounds like you are well aware of issues with AIM dashes. I have a Strada that lumps all of my runs together as one lap. It was working fine last year unt...

There have been some FW problems with the SLM on different systems. You can try unplugging it from the system and powering the PDM, then plugging in the SLM. If it is stuck in booter mode, it might ha...

Think of it has 3 separate systems. You have found the way to connect to the PDM. The SCHD is connected with the USB Mini connector next to the SD card. I'm not sure how your car is wired, but there s...

The GS Dash is a slave to the PDM. Depending on the wiring in the car, it would need a data hub. The GS Dash is then just programmed as a CAN Expansion on the PDM. It's really slick and opens up some ...

The shift lights would be just like in the above example. I haven't plugged into an SR3 XX yet, but it should configure just like the video above shows. You can also put in a GS Dash. That is a small...

Hey guys - talking to AiM, there isn't much of a standard for how the data portion of the cars was handled. For the SR3-XX, it has a PDM in it. I believe the SR3-RSR has an MXL2 in it. Both of those h...

On the PDM, change the Smartycam feed to GPS Speed. Then you will get GPS speed into the camera. It sounds like you have a either bad wheel speed sensor or a bad config on that. I don't know which se...

So you have a PDM32, Radical wheel, and SCHD GP 2.2. The first thing to do with all the components is make sure the FW is up to date. Then, make sure the SCHD is seeing the GPS info when you connect t...