@rjbender Great info. Thanks Rod!

I asked Spring Mountain 1) if the upgrade and new oil spec extends the service interval and 2) whether 15W-60 would benefit engines without the input ...

I just received my 1500 refresh back from Spring Mountain today. Inside is a memo that says "This engine has been fitted with the updated input shaft...

Yes, you have it right. You may be able to get a wrench in there to hold the hub bolt nuts, but it is easier if you remove the uprights. I think ...

Rake plays a significant role in the understeer/oversteer characteristics. More positive rake (when rear ride height is greater than front) results i...

Hmm, another misprint? The factory does not safety-wire the hat to disc bolts at least on the newer cars because the bolts are fastened with a lock n...

@charleyhradicalsportscarregistry-com Hi Charley. I am pretty sure this is a misprint. WISKO says that if you torque the hub bolts to 80 foot-pou...

It might be helpful to unpack what you are receiving for the 8K. I can estimate some of the prices in USD which might be similar to UK prices. se...

Wow. I stand corrected.

That might be your problem -- the grooves in the tripod cup housing are for 7mm clamps. You are using 9.5mm wide clamps which is not the original cla...

You can download the Life ECU data to check for trips.

This must be a difficult one because nobody has answered yet. I have no idea myself, but I am interested in knowing the cause(s) when you are able to...

@gabriel I am sorry, I do not. I referred to my other SR3 several times during the install. I am away this weekend racing (not Radical), but if y...

@rjbender Rod I am using run time but you make a good point. The manual says "every 10 hours of running" which probably means in gear and rolling....

Tripod joint greasing tool. Fits snugly over the roller joint, has a grease gun fitting on the back.