? Do you mean updated the track in the SmartyCam? I just reread your problem, and it sounds different than mine although it seems that the SC could...

I may have a similar problem, but if not exactly the same, it is worth mentioning here anyway so others know. I have two SR3 XXs from 2021 with the ...

@rojid Something does not sound right. Maybe your torque wrench is fouled-up and trying to over-torque the wheel nuts. When I do this by myself, I ...

Like Charley, I use a big 3/4 drive torque wrench: Mountain 16600 3/4" Drive Click Style Torque Wrench - 100-600 ft-lbs/b> It will help with ...

Hi Clark. I plan to be at VIR next week also with my SR3. Looks like we could see some rain. I'll be in one of the pit lane garages -- let me know ...

What is the story on this bike? Can you post a picture or link?

I have several sets listed on the Radical Parts for Sale tab. I will reduce my price to $600/$500 (from $650/$550) -- for tires with 3 or fewer heat ...

You may be able to see a part number on that sensor if you take it out. I searched Bosch oil temperature sensor and found a few like the one below. ...

Correction on the above -- it is not the chassis roll which causes higher vertical load on the outside tires, but the load transfer from inner to oute...

This idea did not work out because the pushrods are too long to allow a ride height drop of 5mm. To get around that I would have to either shorten th...

The the silver ring in your second picture is the spring perch which is used to adjust preload and corner weighting. If there is some sort of set scr...

@azwcat Very interesting. Has anything been said about overall service interval beyond the 40 hours run time recommended refresh for the new seri...

Hard to go wrong with Macs; I have a set of Macs and they are great, however I recently purchased two sets of over-the-tire straps from Autohauler Sup...

I found the problem and a reasonable solution. This is incorrect -- the threads are not tapered; the problem I think is a manufacturing error or I...