Last seen: July 15, 2022 7:11 am
Those bits are the same - if you were to remove the long bolts Charley references that bar would come off and stay attached the diffuser. Leaving the ...
I got mine from/p>
I ran GTX all year. The difference is a lack of ethanol and thus lower oxygen content. At Houston that likely doesn't matter since you aren't at altit...
I wouldn't think you would need any. As a 270 lb driver with 8 gallons of fuel I'm nearly 1700 lbs.
The last set of clamps I bought the invoice said they were 88MM.
I'm sure my process isn't optimal, but here's what I did. I was removing my uprights at the time for replacement so my rotors are off, but that should...
@rlm-dan thanks for all the input. I'm not sure how serious I am about replacing the exhaust - losing the silencer would get me 10 pounds all by itsel...
How do we get one in an SR3?
I bought my spare cap from the Radical dealer and it was maybe 2 or 3 dollars more than what you are looking at here. Another post mentions this part ...
@rjbender - I now have nutserts like you and remove the rear of the diffuser the same way. I highly recommend adding these if you are doing it the old...
@dwang2000 - I usually have the car up on blocks when I drop the diffuser and put it back on. You can do it while it's on the floor, but it is much ea...
Mine behaves the same as well - but I honestly don't pay much attention to what the setting is and just dial it forward as needed. The more 6th - 2nd ...
They are C72 compound. You can see them in the list here now:
It looks like you added a tag rather than a link. If you paste the link directly in the text box it should recognize it on its own.