Thankyou John, My engine is finally running well and the TPS is functioning correctly. I have not removed it to get a part number but I assume that it...

Thanks to Charlie, David and Rod. My TPS has some numbers on it so I'll see if I can find a new one with those numbers. Might not be like yours since ...

Hello Dan and Charley, Some progress today. First thing I did was make sure that the engine would run. Without changing anything, it started and idled...

Hello Charley. I've been out of town and will be trying Dan's suggestions this week. I've also got a new temp sensor and new baro sensor to try. Don

@rlm-dan Thanks, Dan. Your analysis makes sense, since it seems to me that the engine is running lean, at least after running a bit. I am out of town ...

@rlm-dan Thanks, Dan ... In researching what's happening I've read a lot of your posts and they are very helpful. What I've got is the opposite of wha...

Hi Charley, sure, I'll take the 992B. Let me know how to pay you. I tried to look at your parts list but I didn't see a set of caliper seals. I'll tak...

I used the above information to make voltage readings and changes to my MBE ECU TPS. Take the TPS voltage readings with the ignition on. It does not c...

Some progress on the MBE ECU idle/TPS after using the Charlie/Radical info noted in the above post. I used my voltmeter with a safety pin to access...

@davidf ... thanks for the data. No cooling fan on my car; just the circulating pump. Still, yours, runs cooler with the fan off. I'm going to pull th...

@charleyhradicalsportscarregistry-com Thank you and thanks to Radical. I am away for a week but will be right on this when I get back and take photos...

@charleyhradicalsportscarregistry-com .. thank you. I checked the fuel filter and it was perfectly clean. I have taken down the number and will replac...

@charleyhradicalsportscarregistry-com ... fuel is fresh 110L race gas in a new fuel cell. Don