CharleyH .

OK, so I'm back in town, and a special package awaited. It's an open F88RX ECU, one in which I can change the calibration. So I enabled the gear position sensor pin (#73), and calibrated the gear posi...

I'll bet you're plenty fast! More likely just a little smoother than me! 🙂 I'm always two up so the car is constantly pushing 350lbs or so which might be the reason. Appreciate the pic. Hopefully ...

Very nice! I read the whole thing and loved it.

@charleyhradicalsportscarregistry-com So yesterday, I got it up in the air and got the diffuser off and found that the number 4 header had a crack and a hole in it. I started the car and used a leathe...

@lunatic Do you have the leads to connect to the ECU? Do you want to send me your chip file to take a look at? Sounds like either a problem with your start map or that a sensor is not reading correctl...

Thanks for the info - I've bought a new Davies Craig EWP80 pump to replace the non working one. I found that a 12 inch fan isn't enough to keep a SR8 cool at stationary. This has been upgraded to a 14...

This info might be useful to someone:- On the SR8 LM there are two throttle position sensors. The sensor on the left-hand bank is read by the Life Racing ECU, the sensor on the right-hand bank is read...

I use a chatter box system. I've had mine for many years but the concept is still the same. The motorcycle community has a lot of stuff that works perfect for this. I have a permanent headset in ...

Well I threw on a set of the 2019 Hankook tires for my last day of the season. Different car from the Pirelli’s. I used the same set up, didn’t change a thing other than starting pressures The steer...

Hi Guys! Thanks for thinking of me. I don't sell intercoms, but I use them! I think the Speedcom unit is the best right now. Some people also like the unit from Rosso Racing and Trac-Com unit.

@charleyhradicalsportscarregistry-com Thank You, Charlie. I appreciate your help.

Team Stradale has some extra supplies in our garage 2 Suzuki CORE Engine which can be converted to 1340CC or 1500CC engine $7,230.37 each img_4623.jpg 3 New 1340CC engines $14,330.67 each...

Just moved from a Simpson Bandit...........yeah I know it was from my tin top days to a carbon Bell GTX.3. Lift with my Simpson was really bad as you might expect. The GTX.3 has totally eliminated i...

Not sure as I still don't have my data working yet. 🙁 I ran 2:25 in a FE2 car a few weekends ago and I can tell you it's a lot faster than that. I've only made 3 events with the car so far so still...

@charleyhradicalsportscarregistry-com I am sorry I missed this one. I definitely will attend the next invitational!!