CharleyH .

My son is running his SR3 next weekend at Hallett but going CCW. This will be his first race in the car. He's run it several track days at MSR Houston and has run Hallett in Vintage cars. Should be ...

Alvaro, Check this web page for a cross reference of parts. Radical Spares List - MTC Racing I believe the Prosport and Clubsport share a lot of parts

Hey Folks, Sharing some learnings here: My 1500cc SR3 had fuel delivery problems from a clogged fuel filter and the screens in the injectors. It's not clear if the cause was from my car sitting for ye...

Here's the fast lap for the weekend at Hallett in Oklahoma. The track record was within reach but we didn't quite get everything put together to get it done.

Thank you so much I will pull mine out and see which model it is.. Thank you!!!

Just got the quote back from Spring Mountain. They were pretty thorough and helped me out by adding stuff I don't yet know I need (bushings and sleeves and such). None of the items themselves are very...

Progress! Attachment : 20210613_202702.jpg If you ever thought roofing wasn't hard, it isn't. However it IS miserable. Don't do it in the summer. Come about 11 AM I couldn't even touch the shin...

My new rear lamps. 90mm multifunction LED. I hate the chrome, so they got tinted down Attachment : 07A65777-E905-4867-98BE-E02F8C766349.jpeg Attachment : F949AB4E-7E53-4C1B-8D29-67C06B0E650...

Attachment : 3_20_21 Race Photo T12.jpg #959 - This dust cloud made its way over from a another part of the track where someone had run out of track - picture taken by flying robot aerials

In between the time that John and I had agreed on a deal and when I actually went to get it I had been researching and planning. I initially thought a Ford Ecoboost was a good path. It was done in the...

So in my hunt for a track car I was looking at used Radicals. I had read the buyers guide and looking for various posts. I like to research these things probably too much sometimes. It did seem like a...

With metric threads too! Nice find. @nicad

McMaster Carr sells pre threaded lengths of aluminum rod and heim joints that work nicely for fabbing up a shift linkage. quite reasonable prices also!

Attachment : 28576950-6714-47FC-8404-A8B80F8B5751.jpeg Attachment : 324E64FA-9F61-4E96-BF91-90C69C46E9B5.jpeg Attachment : 719194F0-BB09-45E9-A051-F2B3BA6BB15E.jpeg Attachment : ...

I was sorry to see it go, but I'm looking forward to this project, and I love the idea of a K24 installed longitudinally. Lots of RPM, not so much torque. Joe needs some control arms, shocks, springs,...