Crit Scholer

Hi All, as Charley mentioned, I installed the Healtech GIpro. if I was to do it again, I would definitely go with the geartronics. The price is about the same and I would prefer a larger display. Also...

@rjbender, Hi Rod, I had asked Charley about his cover and he posted some pictures HERE, I will definitely shoot some pictures once I get my car back together. Because they’re working off of a templat...

@rjbender, I just ordered and received a car cover from car cover planet specifically for the SR3, however all my fiberglass is at a body shop so I have no idea if the cover fits right but I’m pretty ...

I’m not sure if it’s because my bias is set to far to the front and this switch is on the back but I have to push fairly hard on the brakes to activate the brake lights.

@nick02, awesome, thanks so much for the picture!

@smiffy931, Hi Josh! Thanks for the reply. I had been wondering about the mounting especially since the regulator barbs are 90 degrees offset. That makes since that it would be mounted in the side po...

@nick02 Hi Nikki, Since your gen 1 has a life ECU, it might have the updated pressure regulator. Here's the pressure regulator that I'm planning on installing, it came off a Gen 1 1500 CC with the MBE...

Hi fellow Gen 1 SR3 owners and anyone else reading this post 🙂 I’m converting from Carb to Fuel Injection and I’m wondering if someone with a Gen 1 SR3 could shoot me a picture of where their fuel pre...

@charleyhradicalsportscarregistry-com Hi Charley, looks like it's a little different on the later RS cars. On the earlier MBE version cars, the ECU sits right in front of the engine covered by an alu...

Awesome, Thanks GraemeD. I’m hoping someone with a SR3 can snap a pic of where they are mounted.

Hi All, are the barometric sensor and fuel pressure regulator hooked up to engine vacuum? They both have vacuum barbs but I can’t see anywhere to hook into vacuum on the Jenvey throttle bodies or inta...

@parsonsj, Thanks for the pic! Ever see a VDO pump? Charley has this one in his car: Attachment : 4F93FBE7-73D5-4979-B3B3-C04F752615BB.jpeg

@parsonsj, thank you so much for the part numbers! I’m not familiar with a return-less system. How does that work?

@nick02, thanks for the pic, if Radical didn't change what's below, it looks like they use either a VW golf beetle pump or an Audi A3 pump. Still trying to find a picture of the complete pump out of t...

@nick02, Hi Nikki, thanks so much for the generous offer, unfortunately I have an aluminum tank and need pics for a top mount pump. I’d still be interested to see what type of pump is used in your bla...