John Parsons

After trying a few different fans, I have concluded that anything less than a famous brand fan is a waste of time. 14" is the largest fan size which will fit inside the frame of radiator, although if ...

2020 Radical Australia Cup - calendar Rnd#1 - 6-8 March - Sydney Motorsport Park, New South Wales (Aust. Prod. Car Series) Rnd#2 - 10-12 April - Mount Panorama, Bathurst, New South Wales (CAMS Nationa...

Attachment : Bikesports 2020.JPG

Yes, the SR8 parts are different from SR3. For the SR8 the fronts are $1,241.24 and rear are $1,669.35. Give Spring Mountain a call if you need a set and let them know you are supporting them because...

Glad to hear that you are making progress John!

@parsonsj Hi John! Thanks for writing and that’s awesome that you had the same setup I currently have. How hard was it to re-wire the system for the upgrade and I’m assuming quite a bit of track and b...

Several people have recently asked how to remove the side pod from their SR3 /8 so I decided to share some pictures on how to do it. Removing the side pod really isn’t too hard of a job, it just takes...

I found the easiest way to load it onto a trailer was to start with it on a trailer, and put the two tail to tail. We just pushed her from one to the other on the level! Long low ramps seem to be the ...

I just purchased the pads on Competition Motorsports. They were $20 cheaper per set of pads than the lowest price I found on the web. I received a $50 NASA discount on a $400 purchase with free ship...

I think one of the pins on the connector for the pressure sensor needs replaced, or given a little squeeze, I'll hopefully get that sorted soon. Yes, I'm in the UK. Best send an email to Geartronics a...

Attachment : 031161AE-53FD-4872-A4C5-A6CC4070A831.jpeg Attachment : 296A581C-D0CE-41C7-8A6C-EA41C45766F4.jpeg

Round 3 took place at Anglesey this weekend just gone, some good racing right through the field and some relatively good weather (for the UK). Right next to the sea makes for some scenic racing! At...

If you take a picture of the seal SM should be able to tell you if it is one of theirs or the Factories. Most of the SR8 engines go back to the factory, so you likely have the full information... but...

I‘m flattered now Charley 🤪 , the documentation of my little rebuild reached 500 pictures today.