Rod Bender

@rjbender. I saw some of those but since it was for newer cars I didn't know it would be the same for older ones. I found some things similar on Radical's site but again I didn't think it would be r...

@rjbender I have a simple Aim Solo 2 DL on my car which is much less sophisticated but does use RaceStudio 3. My set up is similar to yours on the screen on my Sports Racer. That same screen you sho...

Ok aero gurus. In the side pods directly behind the front wheel there is a wing mounted vertically. Whats it do? I just had some repairs done and the guy doing them said it seems to wide at the front ...

Air is scooped from the side pods vents and directed to the rear, where the oil and water coolers are mounted. Generally corner speed is optimized in a high downforce road race car; the downforce ad...

@rjbender thanks. i did just that and it was OK. Still uncomfortable on the downshift, it doesn't sound like it enjoys it much.... and i don't know if putting the clutch in on downshift would help or...

I went ahead and did it. Done by Jet Hot in NC. Not cheap. Before the coating I took a temp reading on a spot on the exhaust pipe after letting car idle for a certain time and getting to a certain ...

@rjbender Awesome thanks. Do you apply any kind of revs to switch to first? Or simply disengage clutch slowly and let engine speed catch-up as it engages with drive?

@rjbender, Radical introduced the Life ECU and Life paddle shifting in late 2009 / early 2010. At that time paddle shifting was a fairly expensive option so quite o few of the early cars with Life EC...

To remove the stays from the chassis, there is a long socket head cap screw, I think M8, and nut and washer on the inside. Not that difficult to reach. If the stays are bowed, they can be gently ...

Yes, it is pretty straightforward but can often require drilling off the heads of the button-head cap screws that go through the bottom to the stays because they will get ground down resulting in no m...

@grouparacing Fast and smooth. Nice driving Jonathan. You should try racing ... you might be OK at it. 😜

Thanks allot for your answer.

Hello everyone,First of all, I would like to thank you for having a forum like this where you can find help quickly. Thanks to the operators.Now to my question:Two parameters are displayed in the ECU ...

There are three youtube videos on the Safe is Fast channel about race car setup by David Donohue and Jay O'Connell. They are short videos but densely packed with useful information. Jay says that sh...

Looks Fantastic!