Dan Phillips

UPDATE: I got consensus replies noted below from both Sean and Dan which are super detailed and helpful. I will work with my local dealer for resolution. Now, I am just trying to copy and paste th...

Some additional clarifications: this was an intermittent issue/concern. I ran 4 sessions, it occurred in 2nd, 3rd, and 4th sessions, a couple times each. Each session has approx ~10 laps. In those...

Thank you

It definitely looks like an aggressive slip of a gear popping out, a slipping clutch isn't usually that aggressive, and it doesn't lose as much drive. It looks like you get a near instant 2kRPM surge....

Hi Dan, Sean here from Spring Mountain Racing. Are you able to send us over the Life data so we can take a look at this so we can help solve the issue you're having with the vehicle shifting incorrect...

Update. Got a different ramp truck with aluminum bed and crew cab. First weekend down and loading unloading was a breeze Attachment : FAE5EA26-CE97-4BA3-B952-CDE5913F0692.jpeg Attachment ...

@rjbender Thanks! we’ll soon find out. Since I’m nearing the life of the engine and planned a winter rebuild I’m just loosing out on a few fall sessions - unless more damage was done internally. We’l...

@bluefunelement Hi Christian... probably bad news based on the photos you've posted, but I suspect you have experienced this failure... seems to be fairly common, and according to some engine builder...

Thanks Dan, great info! I do agree that the lead is likely from the fuel, we'll see how much of a difference it makes without the dry cranking, I won't be able to balance the TB until the season is ov...

This is interesting, I didn't realize their main recommendation was off road spec oil, the few local guys in town here run the factory line recommended by our tracks shop. It drives me nuts that motul...

@rlm-dan The seal is installed now and thanks for the tip. I suppose I would have found that out eventually eh!

Today I got an email from one of my Registry friends letting me know that a scammer responded to his "Item wanted" add in the "Parts for Sale" section. Someone texted him from a Louisiana number offe...

Sorry ,I have been away so was unable to answer any questions Like to get it out of my shop so $7000 is about he lowest i can go otherwise i will use it for a future project 714 2230111

G'day Josh - I shipped mine in an 'eski' (beer cooler) and the total weight was just under 30kg's. I would expect the GDU alone to be around 24 or 25kg's?

Posted by: @rlm-dan That output shaft looks like a Gen 1 item and that is a weakpoint of them, Hey, guess who was right that its a K7 output shaft?!?!?! 🙂 I called John at Spring Mountain, emaile...