Dan Phillips

Hi Dan @rlm-dan, I am working on getting the pricing for these items and confirming that the pressure sensors and fuel regulator are available. I believe they are. Regarding your other questions, Y...

@rlm-dan He just wants the whole motorcycle sold, so yes it would be sold with everything. then it would be up to them to sell off the unused bits and modify the engine to what ever standard they want...

I recently bought a 2015 SR3000917 from TX. I've been racing a FFR cobra track beast for the past 8 years. I have been thinking about buying a Radical for years now. Finally pulled the trigger. I ...

Selling race cars is very different from selling "street" cars. The Radical Sellers Guide was created to help Radical owners efficiently and quickly sell their cars. You should find this helpful if ...

Posted by: @rlm-dan @graemed Not sure what fuel you guys have out there but those pistons look great for 60 hours! Just regular out of the pump low sulphur diesel “LOL”

So far it has come apart as planned. everything looks stock so far, except the clutch basket, which has the back plate welded in spots, the gear position sensor is a sealed unit. (Photo’s to come) I d...

The fun has started. The motor has 60 track hours on it. Attachment : C5BDFFF1-CA13-4AA5-9346-B94BED031E50.jpeg Attachment : 9EAA3187-2C4D-497D-AFBA-C6224CCF3BB6.jpeg

Here's the MXS in #87 SR8. The alarm that's on is for low fuel, which I programmed with help from Matt at Trailbrake. Many thanks! Attachment : UNADJUSTEDNONRAW_thumb_11fe.jpg

Attachment : Bikesports 2020.JPG

Checkout the latest question and answer in the "Ask Phil" Discussion Series. Question #4 deals with SR8 transmission and dash developments.

I just added some pictures and more information about the first 4 Radical Clubsports to the Registry that is worth reading. Here is a picture of chassis number 1 with an early prototype body. Chassis ...

OK, so I'm back in town, and a special package awaited. It's an open F88RX ECU, one in which I can change the calibration. So I enabled the gear position sensor pin (#73), and calibrated the gear posi...

Several people have recently asked how to remove the side pod from their SR3 /8 so I decided to share some pictures on how to do it. Removing the side pod really isn’t too hard of a job, it just takes...

Hi Chris, Yes, you should run with axle pucks (that's my part name, lol). It's made from Delrin (acetal) and is glued in place at the factory with silicon adhesive (Permatex UltraBlack works well). ...

@rlm-dan thanks!!!