CharleyH .

To finish this thread off - Mike sent a nice rear body frame and an early 4-strut type wing frame. In trade I sent him a pair of front lower control arms and 3 suspension uprights, which I no longer n...

My guess, it’s BSP, British Standard Pipe

Graeme -- that's what I concluded too -- 3/8" BSPP (last 'P' for parallel), which is 16.6mm and 19 threads per inch.

Hi Charley i sold Phil the car it has a 1500 RPE engine and Quaife box Dry sump high downforse etc the car needs a tiny bit of love which Phil is more than capable of i originaly brought it to use som...

Cheers Charley and of course Paul 👍🏻 It's the first car I've had with air jacks so we'll see if they come in handy. It's the best track day party trick bar none 😁

I updated my trailer with some additional recessed D-ring anchors. I cut through the extruded aluminum floor with a 4 1/2 inch hole saw and through a 1/4 inch thick 5083 aluminum plate that was clamp...

I put my Radical in my trailer first time today for practice. I have a Bulldog 7800 pound winch with synthetic rope and it works really well. The automatic full load brake is very useful for pauses....

Hi Mike, randomly found a pic of my clubsport (zzr1100) gear stick while looking for something else 🙂 My PR6 uses the same setup (gen 2 busa) but different metal work. Both are forward for first, back...

I've raced several weekends this year with FM's, FC's and FA's in our run group. Not sure how much difference there is between FM and Pro FM but I can tell you the FM's were never close. Some of the...

When you buy tie-down straps, buy the best: They've got great customer service and many choices for how to go about tying-down your Radical safely.

@charleyhradicalsportscarregistry-com 1500cc

I'd like to add one more thing I've overlooked and seen many others miss. Make sure your tie down straps are in good condition and most importantly have clips on then end that have a gate that closes...

I keep filling out the order form. It's the other part (contact your wife dealer for pricing) that I have trouble with. 🙂

Thanks John...ordered and on it's way. Image below for future reference. Attachment : 2020-10-01_12-57-36.jpg

@tommymills This is the GDU fluid I am using