Mark W

Has anyone ever changed their own GDU gears? If I remove the nut holding on the right larger gear the gear just slides off. On the left side, I removed the nut, bearing and spacer and the gear will sl...

I’m out of town and don’t have any paperwork handy, but I believe it’s the AUT series. It has an aluminum floor. I bought it from AER Trailer in Waukesha WI. If you call them they probably remember. ...

I purchased the new upgraded ECU from SBD, and the car seems to run fine, but it's winter here so I haven't had the car on the track yet. I feel good though that this will fix the issue. SBD said this...

Would a 2007 have a fuel cell or regular fuel tank?

On the topic of blippers, let's say you're sitting in your garage with the engine running and the car is in third gear idling around 1,500 RPM. If you hit the paddle to downshift to second (car not mo...

I've been corresponding with SBD Motorsport in the UK after talking with someone in NZ that I found on another forum who had the same problem. The ECU is mounted on the firewall close to the engine an...

Reading through Hayabusa forums people point to a fuel pump/filter for this issue. I guess no harm in replacing it to rule that out. It stinks though that there's no way to really test it besides payi...

Check out this video of two trips down the front straight at Road America, the first is lap 6 and next is lap 7 I was taking it easy in my first session just getting used to the car. On lap 7 the c...

The Motive Products pressure bleeder makes this a very easy job.

I'm back in business! It turns out there is a shop in East Troy, WI called Gemini Technologies that used to run Michael Jordan's Suzuki motorcycle race team. And they're less than an hour from my hous...

Here is a better picture of mine. When I was reinstalling the actuator those black tubes popped off the part to the left. I just pushed them back in and the seem to stay, but I don't feel great about ...

I'm in the process of re-installing my engine and noticed the mount that holds components for the shift actuator is pretty loose. It looks like there are just two (loose) rivets holding the plate onto...

I think I was told something like a week when I ordered them, but it's been over a month and they haven't shipped yet.

Attachment : IMG_1324.JPG Here is my car on an inexpensive Triton trailer. It works perfectly for what I need. I've been intending to post of video of the car being loaded with Race Ramps, but it'...

Posted by: @charleyhradicalsportscarregistry-com People have been asking me what Race Ramps I use so I here is a link to the Ramps I have. I purchased them from Reverse Logic. You can also take m...