John Parsons

I'm sure the belt from Pegasus would work, but I know from experience that having the buckle attached to the subs is a pain in the ... uh, neck. Much more comfortable is the hybrid style sub that anc...

@raider89 Sorry Dan for the slow response. The red pad is an ordinary floor jack polyurethane pad designed to reduce scratches that the metal saddle typically leaves. The green pad is a street hockey ...

Wow, loving this. It's so cool that we're beginning to see some "aftermarket" Radicals arrive on the scene. Please keep the story and pictures coming! ps. If only you'd used a MoTeC M1 ECU... haha, ju...

Wow, love hearing back stories like this. Thanks Charley, and thanks Phil!

@jwb Hey Josh, I've got about 10 hours since the last refresh on my JFR. It was factory refreshed a couple of years ago, just before I bought this car. I found the original build order for it (Hewland...

Josh -- no fix here, but I'm always trying to learn more about SR8s. I've got a 2009 that came with a Hewland JFR. I'm wondering if you meant JFR rather than FTR. Or does your car use the Hewland oil ...

Do you have any data-logging? It would be good to confirm that fuel pressure drops during lateral g-force before swapping parts.

I love the Milwaukee Fuel line. I've got 6 or 7 of their 12v tools, and I'm sure their bigger 18v 1/2" impact will do the job. I'm still using an older Ridgid 18v impact with fine results -- and when ...

Contratulations! I could hear the engine revving more quickly than it should. I'll bet you'll find a bit more oversteer with a non-slipping clutch. :). Keep those videos coming!

Confirmed: 3/8" BSPP. Many thanks for all the help!

Graeme -- that's what I concluded too -- 3/8" BSPP (last 'P' for parallel), which is 16.6mm and 19 threads per inch.

Thanks for the help! But I fixed it up myself. Attachment : UNADJUSTEDNONRAW_thumb_19ec.jpg

@charleyhradicalsportscarregistry-com Thanks Charley!

Hey guys -- this fitting comes out of the Quaife Q58 (aka non-hypoid) gearbox in my SR8. It's outer thread dimension is approximately 16.5 mm, and the thread pitch seems to be close to 1.5mm. But I've...

@trailbrake I've been watching them myself. Thanks for letting us know these exist!