m roj

@davidf its the panel/sheet metal that i guess is rivetted to the chassis, on the side next to the passenger (or driver in your case probably), which the PDM is mounted to amongst other things, the c...

Is it relatively straightforward? Radical are sending me a replacement panel from the XX that has the mounting bracket for the PDM so i can finally see its status LED's without having to remove the si...

alright folks, thought i'd update this thread, as today was the day i loaded the car onto the trailer for the very first time. For those of us in the UK - its a Woodford WBT101 which has tilt and ele...

@davidf ok this feels like a dumb question but....where is the water temp sensor? i followed the lines to the swirl pot and off water pump...couldn't see anything obvious? EDIT...Found it...on the en...

@davidf many thanks. ok, i ordered - Motul Auto cool Optimal, premixed (was less hassle/just as cost effective as getting concentrate + distilled water) - The concentrate of the above (they add 'ul...

After removing the sidepod on my SR3 i struggled to get it back on, so removed the radiator first and of course spilt coolant everywhere. i now need to refill with coolant, but cannot find a procedur...

@trailbrake after removing the sidepod i've familiarised myself with how everything is all connected. I hope you could possibly help me with an issue with the shift light module. Attached to the PDM...

Well... Replaced the solenoid and bingo. Starter is back to life. I'll prize apart the old one, curious to know why it failed. I've got a lingering feeling that maybe there's a wider problem causing ...

@charleyhradicalsportscarregistry-com yes its a bit of a frankenstein. chassis 645. it was an Aim development car for the XX, whilst being raced. It ran like that through the 2021 radical challenge s...

removed the sidepod today (thanks to the guide on here) - easy job to remove thankfully, though trying to install it back on my own is going to be a task... made a video showing the wiring - looks lik...

@rjbender just waiting for a weekend of decent weather here in UK (a rarity) before removing sidepod (following Charley's guide off here!). It wouldn't surprise me if the wiring is a mess and things ...

@charleyhradicalsportscarregistry-com the new battery made no difference 😓 tried a new starter, also no different - though wasn't expecting this to work anyway since there's no power going t...

@charleyhradicalsportscarregistry-com I'll be trying it next weekend when I get a chance. I had a go earlier in the week to troubleshoot with my multimeter. Bit difficult doing it on my own but usi...

@charleyhradicalsportscarregistry-com i used a multimeter to check if there's any power going to the starter in the first place - there wasn't. Checked the main battery - reading 14.7V - all good. C...

@charleyhradicalsportscarregistry-com it didn't 😪 The battery itself woudn't charge, was giving an error on my lithium charger, so swapped it for a good one - same result. With no ignition o...